3D Model Datasheet Spice 모델 SPICE S-Param

0201HL (0603)

High Inductance Miniature Chip Inductors

The 0201HL Series has higher inductance values than other 0201 size inductors, with twice the Q factor of thin-film technology inductors of the same size. Measuring just 0.58 x 0.46 x 0.46 mm, they are optimized for impedance matching in 700 MHz LTE and 5G applications.

Optimized for LTE Antenna matching
Twice the Q factor of thin-film multilayer technology
Higher inductance values than other 0201 inductors
0201 size – 0.58 × 0.46 × 0.46 mm high

Need parts for space, military or other critical applications?
See Coilcraft ST145RAP Series

지금 구매:

부품 번호

내 부품 찾기

개수	단품 가격
1	$1.47
200	$1.03
500	$0.72
1000	$0.58
2000	$0.48
4000	$0.42

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

Termination

R = Matte tin over nickel over silver

Packaging

W = 7" machine-ready reel

Tolerance

J = 5%

. 재고 보유 중, 당일 발송 가능.

샘플 신청:

부품 번호

내 부품 찾기

설계자용 키트:

키트	값	가격
C475	7 (20 of each)	$45.00

사양

Electrical specifications at 25°C.

부품 번호 1	인덕턴스 (nH) 2 (허용 오차: ± 5%)	900 MHz		1.7 GHz		2.4 GHz		SRF typ (GHz) 4	DCR max (Ω) 5	Irms (mA) 6
부품 번호 1	인덕턴스 (nH) 2 (허용 오차: ± 5%)	L typ	Q typ 3	L typ	Q typ 3	L typ	Q typ 3	SRF typ (GHz) 4	DCR max (Ω) 5	Irms (mA) 6
0201HL-22NXJR_	22	21.8	36	22.7	52	24.2	62	4.4	0.75	140
0201HL-24NXJR_	24	23.8	36	24.9	53	27.1	56	4.4	0.93	130
0201HL-27NXJR_	27	26.9	35	28.2	47	30.5	55	4.0	1.03	125
0201HL-33NXJR_	33	33	35	35.4	45	39.6	49	3.7	1.14	120
0201HL-39NXJR_	39	39.4	35	42.7	43	49.5	45	3.5	1.55	100
0201HL-47NXJR_	47	47.6	35	52.8	43	64.3	41	3.3	1.70	95
0201HL-51NXJR_	51	51.9	35	58.3	44	71.5	44	3.5	1.85	90

메모

When ordering, please specify packaging code: e.g. 0201HL-51NXJRW
Inductance measured at 250 MHz using a Coilcraft SMD-F test fixture and Coilcraft-provided correlation pieces with an Agilent/HP 4286 impedance analyzer.
Q measured using an Agilent/HP 4991A with an Agilent/HP 16197 test fixture.
SRF is measured on an Agilent 8722ES network analyser (or equivalent) with a Coilcraft SMD-D test fixture. Details
DCR measured at 25°C on a micro-ohmmeter and a Coilcraft CCF858 test fixture, For other operating temperatures, use this DCR at Temperature calculator.
Irms: Current that causes a 15°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings.

종단 처리:

RoHS matte tin over nickel over molybdenum-manganese

패키지:

W = 7″ machine-ready reel. EIA-481 punched paper tape (2000 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
U = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from U to W.

환경

환경:

RoHS 준수 , 할로겐 프리

주변 온도 범위:

−40°C to +125°C with Irms current

보관 온도 범위:

Component: −40°C to +140°C
Tape and reel packaging: −40°C to +80°C

최고 부품 온도:

+140°C (Ambient + temperature rise)

고장 비율(FIT) / 평균 고장률(MTBF):

See FIT/MTBF Calculations

성능 곡선

L vs Frequency

Q vs Frequency

Z vs Frequency

물리적 특성

A max	B max	C max	D	E	F	G	H
0.023	0.018	0.018	0.004	0.015	0.009	0.007	0.018	inches
0,58	0,46	0,46	0,10	0,38	0,23	0,18	0,46	mm

테이프 및 릴 사양

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)					Orientation
7" (178 mm)	7" (178 mm)	A	B	C	D	E	W	P	Po	P1	T
2000	10,000*	178	100	13	14,4	8,4	8	2	4	2	0,68

* Special order

일반 사양

코어 소재:

Ceramic

중량:

0.14 - 0.23 mg

패키지:

2000 per 7″ reel. Paper tape: 8 mm wide, 0.68 mm thick, 2 mm pocket spacing

Temperature coefficient of inductance:

+25 to +150 ppm/°C

납땜/세척

수분 민감도(MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

납땜 열 내성:

Three reflows at >217°C for 90 seconds (+260°C ±5°C for 20 – 40 seconds), allowing parts to cool to room temperature between.

납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.

PCB 세척:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

0201HL (0603)

High Inductance Miniature Chip Inductors