View:
소개
사양
환경
성능 곡선
회로도
물리적 특성
테이프 및 릴
납땜/세척

Datasheet 3D 모델

CDF Series

Surface Mount, 10- and 8-Line Data Line EMI Filters

Our CDF Series virtually eliminates conducted EMI in data line applications. It provides common mode and differential mode noise attenuation and reduces noise by a factor of 32 from 15 MHz to 300 MHz for up to 10 lines (5 pairs).

Virtually eliminates the problem of conducted EMI in data line applications
Provides common mode and differential mode noise attenuation
Reduces noise by a factor of 32 from 15 MHz to 300 MHz
Excellent environmental stability and low cost
300 Vrms isolation (hipot) for one minute

Consider our PDLF Series for 4-, 3- and 2-line applications

지금 구매:

부품 번호

내 부품 찾기

개수	단품 가격
1	$3.75
100	$3.22
250	$2.80
500	$2.43
1000	$1.89
2500	$1.70
5000	$1.54

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

Termination

L = Tin-silver-copper over tin over nickel

Packaging

D = 13" machine-ready reel

. 재고 보유 중, 당일 발송 가능.

샘플 신청:

부품 번호

내 부품 찾기

설계자용 키트:

키트	값	가격
D303	17 (4 of each)	$75.00

사양

Electrical specifications at 25°C.

부품 번호 1	라인	공통 모드 피크 임피던스 (kΩ)	차단 주파수 (MHz) 2	인덕턴스 최소 (µH) 3	Irms (mA) 4	DCR max (mΩ) 5	절연 전압 (Vrms) 6
부품 번호 1	라인	공통 모드 피크 임피던스 (kΩ)	차단 주파수 (MHz) 2	인덕턴스 최소 (µH) 3	Irms (mA) 4	DCR max (mΩ) 5	절연 전압 (Vrms) 6
CDF10000L_	10	0.52 @ 0.043 GHz	43.0	5.0	100	250	300
CDF8000L_	8	0.63 @ 0.037 GHz	53.0	5.0	100	250	300
CDF8500L_	8	0.52 @ 0.042 GHz	53.0	5.0	500	180	300

메모

When ordering, please specify termination and packaging codes: e.g. CDF10000LD.
Frequency at which the differential mode attenuation equals 3 dB
Inductance is per winding, tested at 1 MHz.
Current rating is for each line.
DCR at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
Interwinding isolation (hipot) tested for one minute.

종단 처리:

L = RoHS compliant tin-silver-copper over tin over nickel over phos bronze.
S = non-RoHS tin-lead (63/37). (Special order, added cost)

패키지:

D = 13" machine ready reel
EIA-481 embossed plastic tape (1000 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
B = Less than full reel.
In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.

환경

환경:

RoHS 준수

주변 온도 범위:

–40°C to +85°C

보관 온도 범위:

Component: –40°C to +85°C.
Tape and reel packaging: –40°C to +80°C

고장 비율(FIT) / 평균 고장률(MTBF):

See FIT/MTBF Calculations

성능 곡선

Attenuation (Ref: 50 Ohms) CDF8x00

Impedance vs Frequency CDF10000

Attenuation (Ref: 50 Ohms) CDF10000

Impedance vs Frequency CDF8x00

회로도

물리적 특성

CDF8X00L

Note: Location of the wire slots for parts manufactured prior to August 2017 may be different.

CDF10000L

테이프 및 릴 사양

Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)						Orientation
13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
1000	330	100	13	22,4	16,4	16	12	4	2	4,5	0,46

일반 사양

코어 소재:

Ferrite

중량:

330 – 345 mg

납땜/세척

수분 민감도(MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

납땜 열 내성:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.

PCB 세척:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

CDF Series

Surface Mount, 10- and 8-Line Data Line EMI Filters