サイトの設定

倉庫
言語の設定
通貨の設定
製品
リソース
ビデオライブラリ
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

T6522 Surface Mount

High Frequency Current Sense Transformer

RoHS準拠
  • For use at 50 kHz to 300 kHz and above
  • Small surface mount package
  • 1 Volt per Ampere sensitivity (sensed current windings in parallel)
  • Output sensitivity is doubled by connecting sensed current windings in series
今すぐ購入:
個数 単価
1 $5.18
375 $4.45
750 $3.87
1500 $3.01
3000 $2.58
6000 $2.37

大量のご注文または在庫のない商品については、お見積もりをご依頼ください

. 在庫あり、即日出荷可能.
サンプルを依頼:

仕様

Electrical specifications at 25°C.

部品番号 1
(Hover for schematics)
最小
インダクタンス (mH) 2
DCR max (Ω) 3 巻数比 4 電圧ー時間
製品 (V-µs) 5
周波数 (kHz) 6 電流 (A) 終端
抵抗 RT (Ω) 7
絶縁
電圧 (Vrms) 8
Pri Sec Pri : Sec
T6522-AL_ 3.4 0.006 0.700 1 : 50 30 50 >300 3.0 50.0 500
メモ
  1. When ordering, please specify packaging code: e.g. T6522-ALD
  2. Inductance is for the secondary, measured at 100 kHz, 0.1 Vrms.
  3. DCR at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
  4. The two primary windings may be connected in parallel (1 : 50) to provide up to 3 A (Iin) sensing capability (3 Vout), or connected in series (2 : 50) to provide twice the sensitivity (1 A Iin yields 2 Vout).
  5. Maximum volt-time product for the secondary.
  6. For specific questions regarding frequency range, please contact us at [email protected]
  7. Varying terminating resistance increases or decreases output Voltage/Ampere according to the following equation: RT (Ohms) = Vout × Nsec / Iin.
  8. 500 Vrms primary to secondary isolation.

終端処理:

  • RoHS compliant. 260°C compatible. Tin-silver-copper over silver-palladium-platinum-glass frit terminations.

パッケージ:

  • 13" reel, machine-ready 
    EIA-481 embossed plastic tape (750 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • B = Less than full reel
    In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.
環境
環境:
RoHS準拠
周囲温度範囲:
–40°C to +85°C
保管温度範囲:
Component: –40°C to +185°C
Tape and reel packaging: –40°C to +80°C
時間内の障害(FIT)/平均障害間隔(MTBF):

性能曲線

Voltage vs Current

回路図

senhisms.gif
Varying terminating resistance increases or decreases output Voltage/Ampere according to the following equation: RT = Vout × Nsec / Iin.

物理的特徴

senhismd.gif

テープ&リール仕様

tapereel_pl.gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_w.gif
750 330 100 13 30,4 24,4 24 12 4 2 6,5 0,37

一般仕様

重量:
0.9 g
パッケージ:
750/13″ reel Plastic tape: 24 mm wide, 0.37 mm thick, 12 mm pocket spacing, 6.5 mm pocket depth.

洗浄

PCB洗浄:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

関連製品シリーズ