サイトの設定

倉庫
言語の設定
通貨の設定
製品
リソース
ビデオライブラリ
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

1008AF (2520)

Ferrite Chip Inductors

RoHS準拠 ハロゲンフリー
Our 1008AF Series wirewound inductors feature ferrite core construction and heavy gauge wire for high current handling and broadband filtering. This series covers inductance values from 0.9 uH to 10 uH and comes in ±10% and ±5% tolerances on all values.
  • Inductance values from 0.9 µH to 10 µH
  • 5% tolerance now standard
  • Higher current rating and lower DCR than our other 1008 series

Need parts for space, military or other critical applications?
See Coilcraft ML413RAM Series | See Coilcraft MS413RAM Series | See Coilcraft ST413RAM Series
今すぐ購入:
個数 単価
1 $1.29
200 $1.01
500 $0.76
1000 $0.53
2000 $0.41
4000 $0.31
10000 $0.27

大量のご注文または在庫のない商品については、お見積もりをご依頼ください

. 在庫あり、即日出荷可能.
サンプルを依頼:

デザイナーズキット:
キット 価格
C414 14 (10 of each) $45.00

仕様

Electrical specifications at 25°C.

部品番号 1 インダクタンス (µH) 2 公差 (%) 3 Q typ
@ 2.5 MHz
SRF min (MHz) 4 Isat (mA) 5 DCR max (Ω) 6 Irms (A) 7
1008AF-901X_R_ 0.90 5,10 25 415 1400 0.10 1.3
1008AF-112X_R_ 1.1 5,10 24 376 1300 0.11 1.2
1008AF-132X_R_ 1.3 5,10 37 198 1200 0.11 1.1
1008AF-152X_R_ 1.5 5,10 22 135 1100 0.13 1.0
1008AF-192X_R_ 1.9 5,10 29 126 1000 0.14 1.0
1008AF-222X_R_ 2.2 5,10 21 106 950 0.16 0.95
1008AF-272X_R_ 2.7 5,10 22 70.0 800 0.19 0.90
1008AF-332X_R_ 3.3 5,10 21 59.0 750 0.21 0.80
1008AF-392X_R_ 3.9 5,10 21 55.0 700 0.22 0.80
1008AF-472X_R_ 4.7 5,10 27 48.0 700 0.44 0.65
1008AF-582X_R_ 5.8 5,10 21 37.0 550 0.28 0.75
1008AF-682X_R_ 6.8 5,10 28 33.0 500 0.32 0.70
1008AF-822X_R_ 8.2 5,10 22 34.0 500 0.34 0.65
1008AF-103X_R_ 10 5,10 24 22.0 450 0.46 0.55
メモ
  1. When ordering, please specify tolerance, termination and packaging codes: e.g. 1008AF-103XJRC
  2. Inductance measured at 2.5 MHz using Coilcraft SMD-A fixture in an Agilent/HP 4286A impedance analyzer with Coilcraft-provided correlation pieces.
  3. Tolerances in bold are stocked for immediate shipment.
  4. SRF measured using an Agilent/HP 8753D network analyzer with a Coilcraft SMD-D fixture.
  5. Isat: DC current at 25°C that causes a 10% (typ) inductance drop from its value without current.
  6. DCR measured on a Cambridge Technology Micro-ohmmeter. For other operating temperatures, use this DCR at Temperature calculator.
  7. Current that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves.
     

 

公差:

  • J = 5%  K = 10% (Table above shows stock tolerances in bold.)

終端処理:

  • R = RoHS compliant. Matte Sn over Ni over Ag-Pt-glass frit terminations.
  • T = RoHS Sn/Ag/Cu (95.5/4.0/0.5) (Special order, added cost)
  • S = Not RoHS Sn/Pb (63/37) (Special order, added cost)

パッケージ:

  • C = 7″ machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (7500 parts per full reel).
  • B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C.
環境
環境:
RoHS準拠 , ハロゲンフリー
周囲温度範囲:
–40°C to +85°C with Irms current
保管温度範囲:
Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
最大部品温度:
+125°C (ambient + temp rise). Derating.
時間内の障害(FIT)/平均障害間隔(MTBF):

性能曲線

L vs Current

L vs Frequency

Q vs Frequency

物理的特徴

 1008afd.gif
 


Note: Height dimension is before optional solder application. For maximum height dimension including solder, add 0.006 in / 0,152 mm

テープ&リール仕様

tapereel_pl.gif
 

Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
7" (178 mm) 13" (330 mm) A B C D E W P Po P1 H T part_or_a.gif
2000 7500* 178/330 60/100 13 14,4 8,4 8 4 4 2 2,0 0,3
*Special order

一般仕様

コア材料:
Ferrite
重量:
28 – 33 mg
パッケージ:
2000 per 7″reel; 7500 per 13″ reel Plastic tape: 8 mm wide, 0.3 mm thick, 4 mm pocket spacing, 2.0 mm pocket depth
Temperature coefficient of inductance:
+100 to +350 ppm/°C

はんだ付け/洗浄

湿度感度レベル(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
はんだに対する耐熱性:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
はんだ付けする前に、 Coilcraftコンポーネントのはんだ付けを参照してください。
PCB洗浄:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info

関連製品シリーズ