Datasheet (HA Series) Datasheet (PA/TA Series) SPICEモデル 3Dモデル

PA6693

部品の詳細情報と仕様について

今すぐ購入:

サンプルを依頼:

デザイナーズキット:

キット	値	価格
C458	6 (10 of each)	$45.00

仕様

Electrical specifications at 25°C.

部品番号 1	インダクタンス (nH) 2 (公差: ± 2%)	Q typ @ 50.0 MHz 3	SRF typ (MHz) 4	DCR max (mΩ) 5	Irms (mA) 6
部品番号 1	インダクタンス (nH) 2 (公差: ± 2%)	Q typ @ 50.0 MHz 3	SRF typ (MHz) 4	DCR max (mΩ) 5	Irms (mA) 6
PA6693-AE_	120	67	990	160	860

メモ

When ordering, please specify termination and packaging codes: e.g. HA4031-ALC
Inductance measured at 50 MHz, using a Coilcraft SMD-A fixture in an Agilent/HP 4286A impedance analyzer with Coilcraft-provided correlation pieces.
Q measured measured at 50 MHz, using an Agilent/HP 4291A with an Agilent/HP 16193 test fixture.
SRF measured using an Agilent/HP 8753D network analyzer and a Coilcraft SMD-D test fixture.
DCR measured on a Cambridge Technology micro-ohmmeter and a Coilcraft CCF859 test fixture. For other operating temperatures, use this DCR at Temperature calculator.
Current that causes a 15°C temperature rise from 25°C ambient.

終端処理:

L = RoHS compliant silver-palladium-platinum-glass frit.
R = RoHS compliant matte tin over nickel over silver platinum-glass frit.
S = non-RoHS tin-lead (63/37). (Special order, added cost)
T = RoHS tin-silver-copper (95.5/4/0.5) (Special order, added cost)
P = non-RoHS tin-lead (63/37) over matte tin over nickel over silver-platinum-glass frit. (Special order, added cost)
Q = RoHS tin-silver-copper (95.5/4/0.5) over matte tin over nickel over silver-platinum-glass frit. (Special order, added cost)

パッケージ:

C = 7" machine-ready reel
EIA-481 embossed plastic tape (600 parts per full reel).
B = Less than full reel
In tape, but not machine-ready. To have a leader and trailer added ($25 charge), use code letter C instead.
D = 13" reel, machine-ready
EIA-481 embossed plastic tape. Factory order only, not stocked (2200 parts per full reel).

環境

環境:

RoHS準拠

周囲温度範囲:

–40°C to +125°C with Irms current

保管温度範囲:

Component: –40°C to +140°C.
Tape and reel packaging: –40°C to +80°C

最大部品温度:

+140°C (ambient + temp rise)

時間内の障害（FIT）/平均障害間隔（MTBF）:

See FIT/MTBF Calculations

性能曲線

L vs Frequency

HA Series

Q vs Frequency

HA Series

L vs Frequency

TA/PA Series

Q vs Frequency

TA/PA Series

物理的特徴

A max	B max	C max	D ref	E	F	G	H	I	J
0.195	0.150	0.135	0.070	0.100	0.025	0.128	0.120	0.045	0.118	inches
4,95	3,81	3,43	1,78	2,54	0,64	3,25	3,05	1,14	3,00	mm

Height dimension (C) is before optional solder application.
For maximum height dimension including solder, add 0.006 in / 0,152 mm

テープ＆リール仕様

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
600	2200*	178/330	60/100	13	18,4	12,4	12	8	4	2	3,7	0,3

* Special order

一般仕様

コア材料:

Ceramic

重量:

109 – 128 mg

Temperature coefficient of inductance:

+25 to +125 ppm/°C

はんだ付け/洗浄

湿度感度レベル（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

はんだに対する耐熱性:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

はんだ付けする前に、 Coilcraftコンポーネントのはんだ付けを参照してください。

PCB洗浄:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf.

PA6693

仕様

終端処理:

パッケージ:

性能曲線

L vs Frequency

Q vs Frequency

L vs Frequency

Q vs Frequency

物理的特徴

テープ＆リール仕様

一般仕様

はんだ付け/洗浄

関連製品

HA4031

HA4032

HA4033

HA4034

HA4035

HA4036

PA6691

PA6692

TA7849

TA7850

TA7851

TA7852

関連製品シリーズ

1812CS (4532)

倉庫

言語の設定

通貨の設定

PA6693

この部品をシェアする

選択された構成はご購入いただけません

仕様

終端処理:

パッケージ:

性能曲線

L vs Frequency

Q vs Frequency

L vs Frequency

Q vs Frequency

物理的特徴

テープ＆リール仕様

一般仕様

はんだ付け/洗浄

関連製品

HA4031

HA4032

HA4033

HA4034

HA4035

HA4036

PA6691

PA6692

TA7849

TA7850

TA7851

TA7852

関連製品シリーズ

1812CS (4532)

警告