3D Model Datasheet SPICEモデル SPICE S-Param

0603HL (1608)

High Inductance Ceramic Chip Inductors

Coilcraft's 0603HL Series ceramic chip inductors have the highest inductance values in this size - up to 3.3 µH. Wirewound ceramic construction means high Q and high peak current handling. Their tight ± 5% inductance tolerance results in minimal variation.

Highest inductance values in 0603 size: from 330 nH to 3.3 µH
High Q wirewound construction
±5% inductance tolerance

Need parts for space, military or other critical applications?
See Coilcraft AR312RAP Series | See Coilcraft ST312RAP Series

今すぐ購入:

部品番号

部品を検索

個数	単価
1	$1.19
200	$0.96
500	$0.72
1000	$0.48
2000	$0.34
4000	$0.27
10000	$0.22

大量のご注文または在庫のない商品については、お見積もりをご依頼ください。

Termination

R = Matte tin over nickel over silver-platinum-glass frit

Packaging

C = 7" machine-ready reel

Tolerance

J = 5%

. 在庫あり、即日出荷可能.

サンプルを依頼:

部品番号

部品を検索

デザイナーズキット:

キット	値	価格
C449	14 (10 of each)	$45.00

仕様

Electrical specifications at 25°C.

部品番号 1	インダクタンス (µH) 2 (公差: ± 5%)	Q typ @ 25.0 MHz 3	SRF typ (MHz) 4	DCR max (Ω) 5	Irms (mA) 6	カラーコード 7
部品番号 1	インダクタンス (µH) 2 (公差: ± 5%)	Q typ @ 25.0 MHz 3	SRF typ (MHz) 4	DCR max (Ω) 5	Irms (mA) 6	カラーコード 7
0603HL-331XJR_	0.33	13	420	0.97	330	Violet
0603HL-391XJR_	0.39	13	400	1.1	330	Gray
0603HL-471XJR_	0.47	12	200	1.2	300	White
0603HL-511XJR_	0.51	12	340	1.2	300	Black
0603HL-561XJR_	0.56	12	330	1.4	300	Brown
0603HL-681XJR_	0.68	12	310	1.8	260	Red
0603HL-821XJR_	0.82	14	290	2.5	190	Orange
0603HL-102XJR_	1.0	14	250	2.8	190	Yellow
0603HL-122XJR_	1.2	14	230	3.2	180	Green
0603HL-152XJR_	1.5	15	190	4.1	150	Blue
0603HL-182XJR_	1.8	16	180	5.3	140	Violet
0603HL-222XJR_	2.2	16	165	5.9	130	Gray
0603HL-272XJR_	2.7	16	150	7.0	120	White
0603HL-332XJR_	3.3	18	135	9.1	110	Black

メモ

When ordering, please specify termination and packaging code: 0603HL-332XJRC
Inductance measured at 0.1 Vrms, using a Coilcraft SMD-A fixture in Agilent/HP 4287A impedance analyzer or equivalent with Coilcraft provided correlation pieces.
Q measured using a Coilcraft SMD-A fixture in Agilent/HP 4287A impedance analyzer or equivalent.
SRF measured using Agilent/HP 8753D network analyzer with Coilcraft SMD-D test fixture
DCR measured on Cambridge Technology Micro-ohmmeter or equivalent.
Current that causes a 15°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings.
Each part is marked with a single dot. The color dots are not unique identifiers and correspond to multiple inductance values. Details.

終端処理:

R = RoHS compliant matte tin over nickel over silver-platinum-glass frit.
Q = RoHS tin-silver-copper (95.5/4/0.5) (Special order, added cost)
P = non-RoHS tin-lead (63/37) (Special order, added cost)

パッケージ:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C.

環境

環境:

RoHS準拠 , ハロゲンフリー

周囲温度範囲:

–40°C to +125°C with Irms current

保管温度範囲:

Component: –40°C to +140°C.
Tape & reel packaging: –40°C to +80°C

最大部品温度:

+140°C (ambient + temp rise).

時間内の障害（FIT）/平均障害間隔（MTBF）:

See FIT/MTBF Calculations

性能曲線

L vs Frequency

Q vs Frequency

Z vs Frequency

物理的特徴

A max	B max	C max	D	E	F	G	H	I	J
0.071	0.047	0.037	0.010	0.030	0.011	0.038	0.040	0.025	0.025	inches
1,80	1,19	0,94	0,25	0,76	0,28	0,97	1,02	0,64	0,64	mm

Height dimension (C) is before optional solder application.
For maximum height dimension including solder, add 0.006 in / 0,152 mm.

テープ＆リール仕様

Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	A	B	C	D	E	W	P	Po	P1	H	T
2000	178	100	13	14,4	8,4	8	4	4	2	1,0	0,23

一般仕様

コア材料:

Ceramic

重量:

3.2 – 4.4 mg

パッケージ:

2000 per 7″ reel. Plastic tape: 8 mm wide, 0.23 mm thick, 4 mm pocket spacing, 1.0 mm pocket depth

Temperature coefficient of inductance:

+50 to +150 ppm/°C

はんだ付け/洗浄

湿度感度レベル（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

はんだに対する耐熱性:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

はんだ付けする前に、 Coilcraftコンポーネントのはんだ付けを参照してください。

PCB洗浄:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info

0603HL (1608)

High Inductance Ceramic Chip Inductors