サイトの設定

倉庫
言語の設定
通貨の設定
製品
リソース
ビデオライブラリ
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

GA3095

RoHS準拠

部品の詳細情報と仕様について

シリーズへ移動
今すぐ購入:
個数 単価
1 $0.91
250 $0.68
500 $0.60
1000 $0.53
2500 $0.35
5000 $0.25
10000 $0.23

大量のご注文または在庫のない商品については、お見積もりをご依頼ください

. 在庫あり、即日出荷可能.
サンプルを依頼:
デザイナーズキット:
キット 価格
C459 6 (10 of each) $45.00

仕様

Electrical specifications at 25°C.

部品番号 1 インダクタンス (nH) 2
(公差: ±5%)
Q typ
@ 150 MHz
SRF typ (GHz) 3 DCR max (mΩ) 4 Irms (A) 5
GA3095-AL_ 17.5 140 2.2 2.0 7.0
メモ
  1. When ordering, please specify termination and packaging codes: e.g. WA3097-ALD
  2. Inductance and Q measured at 150 MHz, 0.1 Vrms, 0 A using an Agilent/HP 4291A impedance analyzer or equivalent with an Agilent/HP 16193A test fixture.
  3. SRF measured using an Agilent/HP 8753D network analyzer or equivalent and a Coilcraft SMD-D test fixture. Details
  4. DCR measured at 25°C using a micro-ohmeter. For other operating temperatures, use this DCR at Temperature calculator.
  5. Irms: Current that causes a 15°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings.

終端処理:

  • L = RoHS compliant tin-silver (96.5/3.5) over copper.
  • T = RoHS tin-silver-copper (95.5/4/0.5) over copper. (Special order, added cost)
  • S = non-RoHS tin-lead (63/37) over copper. (Special order, added cost)

パッケージ:

  • C = 7″ machine-ready reel. 
    EIA-481 embossed plastic tape, GA3092 - GA3095 250 parts per full reel; WA3096, WA3097 parts per full reel. Quantities less than full reel available: in tape (not machine ready) or with leader 400 and trailer ($25 charge). 
  • B = Less than full reel. In tape, but not machine-ready.
    In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C.
  • D = 13″ machine-ready reel.
    EIA-481 embossed plastic tape, GA3092 - GA3095 1000 parts per full reel; WA3096, WA3097 1500 parts per full reel. Factory order only, not stocked. 
環境
環境:
RoHS準拠
周囲温度範囲:
−40°C to +125°C with Irms current.
保管温度範囲:
Component: −40°C to +140°C
Tape and reel packaging: −40°C to +80°C
最大部品温度:
+140°C (Ambient + temperature rise)

性能曲線

L vs Frequency

Q vs Frequency

物理的特徴

ga309x_dim.gif

 
Part number Weight
(mg)
GA3092 150
GA3093 220
GA3094 280
GA3095 390
WA3096 470
WA3097 570

テープ&リール仕様

tapereel_pl.gif
Part Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
  7" (178 mm) 13" (330 mm) A B C D E W P Po P1 H T part_or_j.gif
GA3092 250 1000* 178/330 60/100 13 22,4 16,4 16 12 4 2 4,9 0,35
GA3093 250 1000* 178/330 60/100 13 22,4 16,4 16 12 4 2 4,9 0,35
GA3094 250 1000* 178/330 60/100 13 22,4 16,4 16 12 4 2 4,9 0,35
GA3095 250 1000* 178/330 60/100 13 22,4 16,4 16 12 4 2 4,9 0,35
WA3096 400 1500* 178/330 60/100 13 22,4 16,4 16 8 4 2 5,26 0,5
WA3097 400 1500* 178/330 60/100 13 22,4 16,4 16 8 4 2 5,26 0,5
* Special order

一般仕様

パッケージ:
GA3092 – GA3095: 250/7″reel; 1000/13″ reel Plastic tape: 16 mm wide, 0.35 mm thick, 12 mm pocket spacing, 4.9 mm pocket depth
WA3096, WA3097: 400/7″reel; 1500/13″ reel Plastic tape: 16 mm wide, 0.5 mm thick, 16 mm pocket spacing, 5.26 mm pocket depth
Temperature coefficient of inductance:
+5 to +70 ppm/°C

はんだ付け/洗浄

湿度感度レベル(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
はんだに対する耐熱性:
Three reflows at >217°C for 90 seconds (+260°C ±5°C for 20 – 40 seconds), allowing parts to cool to room temperature between.
はんだ付けする前に、 Coilcraftコンポーネントのはんだ付けを参照してください。
PCB洗浄:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

関連製品

関連製品シリーズ