サイトの設定

倉庫
言語の設定
通貨の設定
製品
リソース
ビデオライブラリ
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

XGL4020 Series

Ultra-Low Loss Shielded Power Inductors

RoHS準拠 ハロゲンフリー AEC-Q flag

The XGL4020 Series Ultra-Low Loss Shielded Power Inductors from Coilcraft offer the lowest DC losses and extremely low AC losses for a wide range of DC-DC converters, from hundreds of kHz up to 5+ MHz. These inductors feature a wider range of inductance values and improved Irms current ratings, making them ideal for a variety of applications, including power supplies, amplifiers, and motor control.  

The XGL4020 Series is available in inductance values from 0.042 µH to 8.2 µH, with a maximum current rating of 1.5 A. The inductors are also available in a variety of lead lengths and terminations, making them easy to use in a wide range of applications.  

The XGL4020 Series is RoHS compliant and halogen-free, making them ideal for use in a variety of environmentally friendly applications.  

  • Industry's lowest DCR and ultra-low AC losses over a wide frequency range
  • Soft saturation characteristic to withstand high current spikes
  • Magnetically shielded
  • Composite construction minimizes audible buzzing
  • No thermal aging – perfect for high-temperature applications
  • AEC-Q200 Grade 1 (-40°C to +125°C) with a 165°C max part temperature

Need parts for space, military or other critical applications?
See Coilcraft AE433PGA Series | See Coilcraft ST433PGA Series
今すぐ購入:
個数 単価
1 $2.04
100 $1.79
250 $1.35
500 $0.81
1000 $0.63
3000 $0.55
5000 $0.50

大量のご注文または在庫のない商品については、お見積もりをご依頼ください

. 在庫あり、即日出荷可能.
サンプルを依頼:
デザイナーズキット:
キット 価格
C483 15 (5 of each) $45.00
C509 49 (3 of each) $125.00

仕様

Electrical specifications at 25°C. Operating voltage 0 - 80 V

部品番号 1 インダクタンス (µH) 2
(公差: ±20%)
DCR (mΩ) 3 SRF typ (MHz) 4 Isat (A) 5 Irms (A) 6
typ max 10% drop 20% drop 30% drop 20°C rise 40°C rise
XGL4020-420MEC 0.042 0.85 1.0 700 15.6 26.0 36.0 22.8 33.3
XGL4020-111MEC 0.11 1.4 1.7 250 14.0 21.0 29.0 20.5 29.0
XGL4020-251MEC 0.25 2.5 3.0 130 7.5 12.0 16.5 18.0 24.0
XGL4020-331MEC 0.33 3.0 3.6 110 6.4 10.6 15.2 16.5 23.0
XGL4020-471MEC 0.47 4.2 5.1 95.0 6.1 9.7 13.4 14.3 19.7
XGL4020-601MEC 0.60 5.1 5.9 80.0 4.9 8.2 11.7 13.5 18.4
XGL4020-821MEC 0.82 7.7 8.6 65.0 3.9 6.8 9.4 11.2 14.0
XGL4020-102MEC 1.0 8.2 9.0 60.0 3.8 6.3 8.8 8.8 12.0
XGL4020-152MEC 1.5 13.0 14.3 45.0 3.2 5.3 7.5 8.0 11.1
XGL4020-222MEC 2.2 19.5 21.5 40.0 2.7 4.4 6.2 6.7 8.9
XGL4020-332MEC 3.3 30.8 34.0 30.0 2.2 3.5 4.8 4.9 6.6
XGL4020-472MEC 4.7 43.0 47.3 23.0 1.9 3.0 4.1 4.1 5.6
XGL4020-562MEC 5.6 48.7 53.6 22.0 1.7 2.7 3.7 3.9 5.3
XGL4020-682MEC 6.8 63.6 70.0 21.0 1.6 2.5 3.4 3.1 4.2
XGL4020-822MEC 8.2 71.0 78.1 20.0 1.4 2.3 3.2 3.0 4.1
メモ
  1. When ordering, please specify termination and packaging codes: e.g. XGL4020-822MEC
  2. Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc.
  3. DCR measured at 25°C on a micro-ohmmeter. For other operating temperature use this DCR at Temperature calculator.
  4. SRF measured using an Agilent/HP 4395A or equivalent
  5. Isat: DC current at 25°C that causes the specified inductance drop from its value without current. Temperature derating curves.
  6. Irms: Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves.
    Irms testing was performed on 0.75 inch wide × 0.25 inch thick copper traces in still air. Temperature rise is highly dependent on many factors including pcb land pattern, trace size, and proximity to other components. Therefore temperature rise should be verified in application conditions.

終端処理:

  • E = Halogen free component. RoHS compliant tin-silver over copper terminations.
  • T = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
  • S = non-RoHS tin-lead (63/37). (Special order, added cost)

パッケージ:

  • C = 7″ machine-ready reel. EIA-481 embossed plastic tape. Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked.
環境
環境:
RoHS準拠 , ハロゲンフリー
周囲温度範囲:
−40°C to +125°C with (40°C rise) Irms
保管温度範囲:
Component: –55°C to +165°C.
Tape and reel packaging: –55°C to +80°C
最大部品温度:
+165°C (ambient + temp rise).
時間内の障害(FIT)/平均障害間隔(MTBF):

性能曲線

Inductance vs. Frequency

Inductance vs. Current

物理的特徴

xgl4020d.gif

 

テープ&リール仕様

tapereel_pl.gif


 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
7" (178 mm) 13" (330 mm) A B C D E W P Po P1 H T part_or_ac.gif
1000 3500* 178/330 60/100 13 18,4 12,4 12 8 4 2 2,3 0,23
* Special order
 

一般仕様

コア材料:
Composite
重量:
0.193 - 0.195 g
パッケージ:
1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 2.3 mm pocket depth

はんだ付け/洗浄

湿度感度レベル(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
はんだに対する耐熱性:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
はんだ付けする前に、 Coilcraftコンポーネントのはんだ付けを参照してください。
PCB洗浄:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

関連製品シリーズ

関連製品ファミリー