サイトの設定

倉庫
言語の設定
通貨の設定
製品
リソース
ビデオライブラリ
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

XFL2005 Series

Ultra-Low Profile Shielded Power Inductors

RoHS準拠 ハロゲンフリー
XFL2005 power inductors have the lowest profiles of our molded power inductors. They provide high current handling with low DCR and low AC losses.
  • Low profile with traditional saturation
  • High current handling with low DCR
  • Magnetically shielded
  • Composite construction minimizes audible buzzing
  • No thermal-aging and perfect for high-temperature applications
今すぐ購入:
個数 単価
1 $1.69
50 $1.39
100 $1.12
250 $0.93
500 $0.80
1000 $0.63
2000 $0.55
5000 $0.50

大量のご注文または在庫のない商品については、お見積もりをご依頼ください

. 在庫あり、即日出荷可能.
サンプルを依頼:
デザイナーズキット:
キット 価格
C479 14 (5 of each) $45.00
C509 49 (3 of each) $125.00

仕様

Electrical specifications at 25°C. Operating voltage 0 – 40 V

部品番号 1 インダクタンス (µH) 2
(公差: ±20%)
DCR (Ω) 3 SRF typ (MHz) 4 Isat (A) 5 Irms (A) 6
typ max 10% drop 20% drop 30% drop 20°C rise 40°C rise
XFL2005-151ME_ 0.15 0.085 0.098 590 1.1 1.6 1.9 1.3 1.6
XFL2005-221ME_ 0.22 0.11 0.13 480 0.72 1.2 1.5 1.1 1.5
XFL2005-331ME_ 0.33 0.14 0.17 380 0.65 1.1 1.3 1.0 1.3
XFL2005-471ME_ 0.47 0.18 0.20 275 0.60 0.97 1.2 0.95 1.3
XFL2005-681ME_ 0.68 0.22 0.25 220 0.50 0.75 0.95 0.80 1.1
XFL2005-102ME_ 1.0 0.38 0.43 160 0.33 0.58 0.76 0.61 0.84
XFL2005-152ME_ 1.5 0.48 0.56 130 0.30 0.52 0.70 0.54 0.70
XFL2005-222ME_ 2.2 0.67 0.78 110 0.25 0.42 0.56 0.48 0.66
XFL2005-332ME_ 3.3 0.92 1.1 85.0 0.24 0.38 0.50 0.37 0.50
XFL2005-472ME_ 4.7 1.5 1.7 70.0 0.20 0.31 0.40 0.31 0.41
XFL2005-562ME_ 5.6 1.7 2.0 65.0 0.16 0.26 0.33 0.29 0.39
XFL2005-682ME_ 6.8 1.9 2.2 60.0 0.15 0.25 0.32 0.28 0.38
XFL2005-822ME_ 8.2 2.5 2.8 50.0 0.12 0.20 0.25 0.24 0.33
XFL2005-103ME_ 10 2.8 3.1 48.0 0.13 0.19 0.24 0.22 0.29
メモ
  1. When ordering, please specify packaging code: e.g. XFL2005-103MEC
  2. Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc.
  3. DCR measured at 25°C on a micro-ohmmeter. For other operating temperatures, use this DCR at Temperature calculator.
  4. SRF measured using an Agilent/HP 4395A or equivalent.
  5. Isat: DC current at 25°C that causes the specified inductance drop from its value without current. Temperature derating curves.
  6. Irms: Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves.

終端処理:

  • E = RoHS compliant tin-silver-copper (96.5/3/0.5) over tin over nickel over silver-platinum.
  • S = non-RoHS tin-lead (63/37). (Special order, added cost)

パッケージ:

  • C = 7″ machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C.
  • D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (7500 parts per full reel).
環境
環境:
RoHS準拠 , ハロゲンフリー
周囲温度範囲:
–40°C to +85°C with (40°C rise) Irms
保管温度範囲:
Component: –55°C to +125°C.
Tape and reel packaging: –55°C to +80°C
最大部品温度:
+125°C (ambient + temp rise).
時間内の障害(FIT)/平均障害間隔(MTBF):

性能曲線

Inductance vs. Frequency

Inductance vs. Current

物理的特徴

xfl2005d-(1).gif

テープ&リール仕様

tapereel_pl.gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
7" (178 mm) 13" (330 mm) A B C D E W P Po P1 H T part_or_xfl2006.gif
2000 7500* 178/330 60/100 13 14,4 8,4 8 4 4 2 0,76 0,28
* Special order

一般仕様

コア材料:
Composite
重量:
8.4 - 9.3 mg
パッケージ:
2000/7″ reel; 7500/13″ reel Plastic tape: 8 mm wide, 0.28 mm thick, 4 mm pocket spacing, 0.76 mm pocket depth

はんだ付け/洗浄

湿度感度レベル(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
はんだに対する耐熱性:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
はんだ付けする前に、 Coilcraftコンポーネントのはんだ付けを参照してください。
PCB洗浄:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

関連製品シリーズ

関連製品ファミリー