View:
Einführung
Technische Daten
Umwelt/Umgebung
Kennlinien
Physikalische Eigenschaften
Gurt/Rolle
Löten/Reinigen

Datasheet SPICE-Modell SPICE S-Param 3D-Modelle

1512SP 2712SP Series

1512SP / 2712SP Series

Mini Air Core Inductors

Inductance values from 2.5 nH to 150 nH (tolerances as low as 2%)
Tight tolerance can eliminate circuit tuning
Acrylic jacket provides a flat top for pick and place
Exceptionally high Q over a wide frequency range
Solder coated leads ensure reliable soldering
Wide range of standard EIA inductance values
Available in two sizes: 4.45 × 3.94 × 3.15 mm and 6.86 × 4.45 × 3.15 mm
RoHS-compliant 260°C compatible. Terminations: tin-silver over copper
COTS Plus tin-silver-copper and tin-lead terminations available

Jetzt kaufen:

Teilenummer

Finde mein Bauteil

Anzahl	Einzelpreis
1	$0,97
250	$0,79
500	$0,63
1000	$0,55
2000	$0,37
5000	$0,25

Für große Mengen oder nicht vorrätige Artikel bitte ein Angebot anfordern.

Termination

E = Tin-silver

Packaging

C = 7" machine-ready reel

Tolerance

J = 5%

G = 2%

. Auf Lager, noch heute versandbereit.

Muster anfordern:

Teilenummer

Finde mein Bauteil

Designer-Kits:

Kit	Werte	Preis
C501	32 (10 of each)	$85,00
C501-2	32 (10 of each)	$105,00

Technische Daten

Electrical specifications at 25°C.

1512SP Series

Teilenummer 1	Induktivität (nH) 2	Toleranz (%) 3	Q min @ 150 MHz 4	SRF typ (GHz) 5	DCR max (mΩ) 6	Irms (A) 7
Teilenummer 1	Induktivität (nH) 2	Toleranz (%) 3	Q min @ 150 MHz 4	SRF typ (GHz) 5	DCR max (mΩ) 6	Irms (A) 7
1512SP-2N5K1E_	2,5	10	80	14,0	1,0	11,1
1512SP-2N7K1E_	2,7	10	80	14,0	3,0	8,4
1512SP-4N7_2E_	4,7	1,2,5	80	18,0	2,0	9,4
1512SP-5N6_2E_	5,6	1,2,5	80	18,0	3,2	6,6
1512SP-6N8_3E_	6,8	1,2,5	80	6,4	2,1	9,8
1512SP-8N2_3E_	8,2	1,2,5	80	7,2	2,9	7,4
1512SP-10N_4E_	10,0	1,2,5	80	3,4	2,5	9,2
1512SP-12N_4E_	12,0	1,2,5	80	4,1	3,5	8,0
1512SP-15N_4E_	15,0	1,2,5	80	4,5	5,0	5,9
1512SP-18N_4E_	18,0	1,2,5	80	5,2	9,3	3,7
1512SP-22N_5E_	22,0	1,2,5	80	3,1	5,3	5,2
1512SP-27N_5E_	27,0	1,2,5	80	4,2	10,6	3,5
1512SP-33N_6E_	33,0	1,2,5	80	2,8	8,6	3,9
1512SP-43N_7E_	43,0	1,2,5	80	2,1	10,6	4,3
1512SP-51N_7E_	51,0	1,2,5	80	2,1	14,5	2,7
1512SP-62N_8E_	62,0	1,2,5	80	1,8	15,5	2,7

2712SP Series

Teilenummer 1	Induktivität (nH) 2	Toleranz (%) 3	Q min @ 150 MHz 4	SRF typ (GHz) 5	DCR max (mΩ) 6	Irms (A) 7
Teilenummer 1	Induktivität (nH) 2	Toleranz (%) 3	Q min @ 150 MHz 4	SRF typ (GHz) 5	DCR max (mΩ) 6	Irms (A) 7
2712SP-10N_4E_	10,0	1,2,5	85	6,6	3,1	10,3
2712SP-12N_5E_	12,0	1,2,5	85	5,8	3,4	7,8
2712SP-15N_6E_	15,0	1,2,5	85	4,9	3,3	8,2
2712SP-18N_7E_	18,0	1,2,5	85	3,9	3,5	7,9
2712SP-22N_7E_	22,0	1,2,5	85	3,9	4,5	7,0
2712SP-27N_8E_	27,0	1,2,5	85	3,1	5,0	6,6
2712SP-33N_8E_	33,0	1,2,5	85	3,3	7,4	5,1
2712SP-39N_9E_	39,0	1,2,5	90	2,7	6,8	4,6
2712SP-47N_0E_	47,0	1,2,5	90	2,4	8,0	4,8
2712SP-51N_0E_	51,0	1,2,5	95	2,4	9,3	4,1
2712SP-56N_0E_	56,0	1,2,5	95	2,6	15,5	2,9
2712SP-68N_1E_	68,0	1,2,5	100	2,3	16,0	3,1
2712SP-82N_3E_	82,0	1,2,5	100	1,9	14,7	2,8
2712SP-101_4E_	100,0	1,2,5	100	1,8	19,0	2,3
2712SP-121_4E_	120,0	1,2,5	100	1,6	26,5	2,3
2712SP-151_6E_	150,0	1,2,5	100	1,4	29,0	2,2

Hinweise

When ordering, please specify tolerance, termination and packaging codes: e.g. 2712SP-151J6EC
Inductance measured at 150 MHz using an Agilent/HP 4286A or equivalent with a Coilcraft SMD-A fixture and Coilcraft supplied correlation.
Tolerances in bold are stocked for immediate shipment.
Q measured at 150 MHz using an Agilent/HP 4291A with an Agilent/HP 16193A test fixture or equivalents.
SRF measured with an Agilent 8753ES network analyzer or equivalent and a Coilcraft CCF1268 test fixture. Details
DCR tested at 25°C on a Keithley 580 Micro-ohmmeter or equivalent. For other operating temperatures, use this DCR at Temperature calculator.
Irms: Current that causes a 15°C temperature rise from 125°C ambient. This information is for reference only and does not represent absolute maximum ratings.

Toleranz:

F = 1%, G = 2%, J = 5%, K = 10% (Table above shows stock tolerances in bold.)

Anschlüsse:

E = Halogen free component. RoHS compliant tin-silver (96.5/3.5) over copper terminations.
T = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
S = non-RoHS tin-lead (63/37). (Special order, added cost)

Verpackung:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape, 700 (1512SP) or 500 (2712SP) parts per full reel. Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked, 2500 (1512SP) or 2200 (2712SP) parts per full reel.

Umwelt/Umgebung

Umwelt/Umgebung:

RoHS-konform , Halogenfrei

Umgebungstemperaturbereich:

−40°C to +125°C with Irms current.

Lagertemperaturbereich:

Component: −40°C to +140°C
Tape and reel packaging: −40°C to +80°C

Maximale Bauteiltemperatur:

+140°C (Ambient + temperature rise)

Ausfälle pro Zeiteinheit (FIT) / Mittlere Ausfallzeit (MTBF):

See FIT/MTBF Calculations

Kennlinien

L vs Frequency

1512SP

Q vs Frequency

1512SP

L vs Frequency

2712SP

Q vs Frequency

2712SP

Physikalische Eigenschaften

Gurt/Rolle-Spezifikationen

Parts per reel			Reel dimensions (mm)					Tape dimensions (mm)
	7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
1512SP	700	2500*	178/330	60/100	13	18,4	12,4	12	8	4	2	3,3	0,32
2712SP	500	2200*	178/330	60/100	13	12,4	16,4	16	8	4	2	3,4	0,28

* Special order

Allgemeine Spezifikation

Temperature coefficient of inductance:

+5 to +70 ppm/°C

Löten/Reinigen

Feuchteempfindlichkeitsstufe (MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

Löttemperaturbeständigkeit:

Three reflows at >217°C for 90 seconds (+260°C ±5°C for 20 – 40 seconds), allowing parts to cool to room temperature between.

Vor dem Löten bitte den Beitrag Löten von Coilcraft-Bauelementen lesen.

Baugruppenreinigung:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

1512SP / 2712SP Series

Mini Air Core Inductors