PFL4517 Series

Shielded Power Inductors

PFL4517 ultra-small molded power inductors offer the perfect combination of size, performance and price. PFL inductors feature soft saturation for high peak currents and magnetic shielding for high-density packaging.

Tiny, cost-effective molded power inductors
Soft saturation for peak current handling
Magnetically shielded
No thermal aging

Jetzt kaufen:

Teilenummer

Finde mein Bauteil

Anzahl	Einzelpreis
1	$0,80
250	$0,69
500	$0,58
1000	$0,46
2500	$0,41
5000	$0,37
10000	$0,32

Für große Mengen oder nicht vorrätige Artikel bitte ein Angebot anfordern.

Termination

E = Matte tin over nickel

Packaging

C = 7" machine-ready reel

Tolerance

M = 20%

. Auf Lager, noch heute versandbereit.

Muster anfordern:

Teilenummer

Finde mein Bauteil

Designer-Kits:

Kit	Werte	Preis
C451	15 (3 of each)	$55,00

Technische Daten

Electrical specifications at 25°C.

Teilenummer 1	Induktivität (µH) 2 (Toleranz: ±20%)	DCR (mΩ) 3		SRF typ (MHz) 4	Isat (A) 5			Irms (A) 6
Teilenummer 1	Induktivität (µH) 2 (Toleranz: ±20%)	typ	max	SRF typ (MHz) 4	10% drop	20% drop	30% drop	20°C rise	40°C rise
PFL4517-681ME_	0,68	40	50	375	4,1	6,0	6,5	1,9	2,7
PFL4517-102ME_	1,0	50	60	300	3,5	4,8	5,3	1,7	2,3
PFL4517-222ME_	2,2	78	95	235	2,7	4,0	4,2	1,4	1,8
PFL4517-272ME_	2,7	168	200	210	2,1	2,5	2,6	1,2	1,7
PFL4517-332ME_	3,3	150	180	205	2,2	2,9	3,2	0,85	1,2
PFL4517-472ME_	4,7	210	250	185	2,0	2,7	3,0	0,80	1,1
PFL4517-562ME_	5,6	240	290	170	1,7	2,4	2,6	0,70	1,0
PFL4517-822ME_	8,2	390	460	150	1,4	2,1	2,3	0,50	0,69
PFL4517-103ME_	10	620	700	97,0	1,0	1,4	1,5	0,63	0,83

Hinweise

When ordering, please specify termination and packaging codes: e.g. PFL4517-103MEC
Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4263B LCR meter.
DCR measured at 25°C using a micro-ohmmeter. For other operating temperatures, use this DCR at Temperature calculator.
SRF measured using an Agilent/HP 8753D network analyzer and a Coilcraft SMD-D test fixture.
Isat: DC current at 25°C that causes the specified inductance drop from its value without current. Temperature derating curves.
Irms: Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves.

Anschlüsse:

E = Halogen free component. RoHS-compliant matte tin over nickel over silver-platinum-glass frit terminations.
Q = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
P = non-RoHS tin-lead (63/37). (Special order, added cost)

Verpackung:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape (1000 parts per full reel).
B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (5000 parts per full reel).

Umwelt/Umgebung

Umwelt/Umgebung:

RoHS-konform , Halogenfrei

Umgebungstemperaturbereich:

–40°C to +85°C with (40°C rise) Irms current

Lagertemperaturbereich:

Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C

Maximale Bauteiltemperatur:

+125°C (ambient + temp rise)

Ausfälle pro Zeiteinheit (FIT) / Mittlere Ausfallzeit (MTBF):

See FIT/MTBF Calculations

Kennlinien

Inductance vs Current

Inductance vs Frequency

Physikalische Eigenschaften

Gurt/Rolle-Spezifikationen

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
1000	5000*	178/330	60/100	13	18,4	12,4	12	8	4	2	1,65	0,3

* Special order

Allgemeine Spezifikation

Kernmaterial:

Composite

Gewicht:

89.8 mg

Verpackung:

1000/7″ reel; 5000/13″ reel. Plastic tape: 12 mm wide, 0.21 mm thick, 8 mm pocket spacing, 1.65 mm pocket depth

Löten/Reinigen

Feuchteempfindlichkeitsstufe (MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

Löttemperaturbeständigkeit:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

Vor dem Löten bitte den Beitrag Löten von Coilcraft-Bauelementen lesen.

Baugruppenreinigung:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

PFL4517 Series

Shielded Power Inductors